to think the nature and environment.
Packing unit :
Aerosol 420㎖/Can, 20cans/Box
Product information
YECOA YL-701 has good liquidity for welding Slag, and excellent peeling characteristics of slag lump.
● Excellent permeability.
● Safe for metals due to non-corrosiveness.
● Satisfactory surface states.
● Outstating peeling characteristics of Slag as compared with the past (more than 3 times)
● No occurrence of Blow Hole (in the case of 2 Pieces)
● Satisfactory peeling characteristics of Slag at base metal temperature of 60℃ Slug remover for manual welding.
Usage
Semi-automatic welding, automatic welding, etc.
How to use
● Always wear safety equipment before work.
● Keep 30cm away from target object to spray the product.
● After the coating on the weld when removing Slag generated during the operation,
excellent peeling property of Slag.
● Do not use it near fire.
Precautions
● It can catch fire when temperature is over 200℃ in using the product. ● Be careful. ● Odor is felt hardly when fume and gas are created. ● Use it in the well-ventilated place. ● Keep it in the cool place below 40℃ ※ Please observe the following points when storing and using the product and discard.
● Even though it is low-flammable, keep away from fire to spray it.
● Provide good ventilation for long-time use.
● Keep it in the well-ventilated place below 40℃.
● Do not use it toward fire.
● Do not use near heater or stove.
● Do not use in the room using fire.
● Do not keep it in the place above 40℃.
● Provide ventilation to use it in the closed room.
● Do not throw it away into fire.
● Punch the can to throw it away.
● Do not keep it in the closed place.
● Spraying may not work well below 5℃.
