YECOA YL-806 is a product which allows easy detection of fine defects through making contrast

clear in surface detection by uniformly coating and drying the surface of inspection object followed

by spraying of general magnetic particles (YL-807) for inspection. It is convenient as the white paint

(YL-806) can be easily removed using cleaner after inspection is finished.

The white paint (YL-806) maximizes color contrast with the general magnetic

 particles (YL-807), making inspection smooth.

● Always wear safety equipment before work.

1. Please clean the contaminants on the surface that needs to be tested with cleaner

    (YL-801)(Drying Time 5 ∼10min).

2. Please spray the white paint (YL-806) evenly.

3. Please form the magnetizing current magnetic field.

4. Please spray the black magnetic particle spray (YL-807) evenly.

5. Please examine the testing area with naked eye.

 ※ Please observe the following points when storing and using the product and discard.

● Even though it is low-flammable, keep away from fire to spray it.

● Provide good ventilation for long-time use.

● Keep it in the well-ventilated place below 40℃.

● Do not use it toward fire.

● Do not use near heater or stove.

● Do not use in the room using fire.

● Do not keep it in the place above 40℃.

● Provide ventilation to use it in the closed room.

● Do not throw it away into fire.

● Punch the can to throw it away.

● Do not keep it in the closed place.

● Spraying may not work well below 5℃.