YECOA YL-109 is a high-power dust remover which is used suitably for parts of electrical, electronic

and measuring instruments.

● Excellent stability in electrical insulation.

● No residues or condensates left after use.

● Contaminants swiftly and readily removed by high-pressure air.

● PCB(Board), computer, IC, VTR, audio, cassette, CARD, communication equipment.

● Facsimile, motorized typewriter, copier.

● Precision test equipment, hot-air blower, etc.

● Electronic components, other ultra precision instrument, parts.

● Always wear safety equipment before work.

● Use it by standing the container upright.

● Connect attached pipe if necessary.

● Spray it about 20~30cm away from target object.

● Declined spraying disperse liquid contained.

● Use it by standing the container upright.

● Do not keep it inside car in summer.

● Keep in the place below 40℃.

● Keep your children away from it.

● Continuous spraying over five seconds cools the can, and decreases spraying pressure.

● Use it in single-shot way.

● Lowered spraying pressure is not product trouble but caused when liquified gas takes

    surrounding heat during vaporization and cools down.

● When product temperature gets normal, spraying works well.

※ Please observe the following points when storing and using the product and discard.

● Do not use it toward fire.

● Provide good ventilation for long-time use.

● Do not use near heater or stove.

● Do not keep it in the place above 40℃.

● Provide ventilation to use it in the closed room.

● Do not throw it away into fire.

● Punch the can to throw it away.

● Spraying may not work well below 5℃.