YECOA YL-501S is a silver galvanizing agent.

● Excellent durability, heat resistance(heat resistance 350℃)

● Galvanizing with excellent heat resistance & chemical resistance for coated parts, accompanied

    by excellent durability.

● High-adhesion special binder plating agent for vessel, vehicle, bridge, power generation,

    building, etc.

● Excellent rust inhibition particularly for harsh environments with much salt or ease of corrosion or

    even already corroded metal surfaces.

● Rust inhibition for steel materials and structures.

● Repair and substitution for zinc plating, repair and finish coating for damaged part of plating.

● Bridge, steel tower, steel automobile, railroad vehicle, gas piping, pipe, etc.

● High-temperature generation part such as automotive muffler, etc.

● Always wear safety equipment before work.

● Clean the dust, oil contents and grease on the metal surface.

(Using our metal cleaner, they are removed easily)

● Shake up and down lightly before use.

● Spray twice or three times to make thick film formed.

● Spray it about 20~30cm away from target object.

● Apply it again depending on desired thickness.

● Time for tack free drying is about 2∼3 minutes.

● Complete hardening takes 24 hours.

● Use the target after complete hardening.

 ※ Please observe the following points when storing and using the product and discard.

● Even though it is low-flammable, keep away from fire to spray it.

● Provide good ventilation for long-time use.

● Keep it in the well-ventilated place below 40℃.

● Do not use it toward fire.

● Do not use near heater or stove.

● Do not use in the room using fire.

● Do not keep it in the place above 40℃.

● Provide ventilation to use it in the closed room.

● Do not throw it away into fire.

● Punch the can to throw it away.

● Do not keep it in the closed place.

● Spraying may not work well below 5℃.